Sennheiser EM 2000 Manual do Utilizador

EM 2050EM 2000Instruction manual

Product overview8햻 Transmitter type Transmitter Product name of the linked 2000 series transmitterThe product name is displayed only if the linked tra

Putting the receiver into operation9Putting the receiver into operationPreparing the receiver for useSetting up the receiver on a flat surfaceFitting

Putting the receiver into operation10Connecting the rod antennas to the rear of the receiver왘Connect the rod antennas 씏 (see diagram). 왘 Align the ant

Putting the receiver into operation11왘 Connect the rod antennas 씏 to the two BNC sockets of the BNC cables .왘 Align the antennas upwards in a V-shape

Putting the receiver into operation12Connecting an amplifier/mixing consoleThe receiver’s XLR-3M socket 쐉 and the ¼” (6.3 mm) jack socket 쐈 are connec

Using the receiver13Using the receiverTo establish a transmission link, proceed as follows:1. Switch the receiver on (see below).2. Switch the transmi

Using the receiver14왘 Set the headphone volume control 쐋 to the minimum position.왘 Connect headphones with a ¼” (6.3 mm) stereo jack plug to the headp

Using the receiver15The lock mode icon 햾 flashes prior to the lock mode being activated again.Muting the audio signalTo mute the audio signal:To unmut

Using the operating menu16Using the operating menuThe buttonsOverview of the operating menuWhen one of the standard displays is shown on the display p

Using the operating menu17Display Function of the menu item PageMain menu “Menu”Squelch Adjusts the squelch threshold 20Easy Setup Scans for unused fr

Using the operating menu18Working with the operating menuBy way of example of the “Frequency Preset” menu, this section describes how to use theoperat

Using the operating menu19Changing and storing settingsCanceling an entryTo return to the last edited menu item:Exiting a menu itemTo return to the ne

Adjusting settings via the operating menu20Adjusting settings via the operating menuThe main menu “Menu”Adjusting the squelch thresholdThe squelch eli

Adjusting settings via the operating menu21Scanning for, releasing and selecting frequency presetsSelecting the frequency bank and the channel manuall

Adjusting settings via the operating menu22To enter a name, proceed as follows:Adjusting the audio output levelAdjustment range: –24 dB to +24 dB, adj

Adjusting settings via the operating menu23Getting into the extended menu “Advanced Menu“To get into the extended menu “Advanced Menu” (see page 23):왘

Adjusting settings via the operating menu24왘 Set the desired frequency bank.왘 Set the desired channel.왘 Set the desired frequency.Changing the setting

Adjusting settings via the operating menu25Getting into the “Warnings” submenuTo get into the “Warnings” submenu (see page 27):왘 From the extended men

Adjusting settings via the operating menu26Displaying the software revisionYou can display the current software revision of the receiver.왘 For informa

Adjusting settings via the operating menu27The “Warnings” submenuActivating/deactivating warning messages Standard displays with additional functionsT

Contents1ContentsImportant safety instructions ...

Adjusting settings via the operating menu28Doing a soundcheckBy doing a soundcheck, you can check the reception area for field strength gaps (“dropout

Synchronizing a transmitter with the receiver29Synchronizing a transmitter with the receiverWhen synchronizing a transmitter with a receiver, please o

Synchronizing a transmitter with the receiver30Operation withoutnetwork왘 Switch off all transmitters of your system that are to be automatically confi

Cleaning the receiver31Cleaning the receiver왘 Before cleaning, disconnect the device from the mains. 왘 Use a slightly damp cloth to clean the receiver

Accessories32If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,please contact y

Accessories33SpecificationsRF characteristicsAF characteristicsOverall deviceModulation wideband FMReceiving frequency ranges 516–558, 558–626, 626–69

Manufacturer Declarations34In compliance withApproved byConnector assignmentManufacturer DeclarationsWarrantySennheiser electronic GmbH & Co. KG g

Manufacturer Declarations35Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industr

Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germanywww.sennheiser.comPrinted in GermanyPubl. 01/09529666/A01

Important safety instructions2Important safety instructions1. Read these instructions.2. Keep these instructions. Always include these instructions wh

Important safety instructions3This symbol is intended to alert the user to the risk of electric shock if the receiver is opened.There are no user serv

The EM 2000 and EM 2050 rack-mount receivers4The EM 2000 and EM 2050 rack-mount receiversThis rack-mount receiver is part of the 2000 series. With thi

Delivery includes5Each frequency range (Aw–Ew, Gw) offers 26 frequency banks with up to 64 channels each:Each of the channels in the frequency banks “

Product overview6Product overviewOverview of the EM 2000/EM 2050 receiverThe EM 2050 twin receiver has the same operating elements as the EM 2000 rece

Product overview7Overview of the displaysAfter switch-on, the receiver displays the standard display “Receiver Parameters”. For furtherillustrations a