Sennheiser Freeport Manual do Utilizador

Instructions for useNotice d‘emploiIstruzioni per l’usoInstrucciones de usofreeport_514013_0808_Sp5.book Seite 1 Mittwoch, 26. November 2008 2:16

9Switching the radio microphone on/off왘 Use the ON/OFF switch  to switch the radio microphone on or off.If the radio microphone is switched on, the r

10Adjusting the squelch thresholdInterference due to other transmission links can be eliminated asfollows:왘 Switch off the transmitter. The receiver s

11If problems occur...Accessories and variantsProblem Possible cause Possible solutionNo operation indication Battery is flat Replace the batteryNo ma

12Specifications of the freePORT systemsSystem characteristicsIndividual componentsME 2 clip-on microphoneTransmission/receiving frequencies4 UHF tran

13Type approvalsAlso approved byTransmitters that operate in the frequency range E (863 – 865 MHz) can be used licence-free in thefollowing countries:

14Manufacturer declarationsWarrantySennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty con

Sennheiser electronic GmbH & Co. KGAm Labor 130900 Wedemark, Germanywww.sennheiser.comPrinted in Taiwan

1Contents Important safety instructions ... 2The freePORT systems ...

2Important safety instructionsy Read this instruction manual.y Keep this instruction manual in a safe place. Always include thisinstruction manual whe

3The freePORT systemsDesigned for different areas of application, the freePORT systems areavailable in three variants.y Presentation Set:This system i

4Delivery includesEM 1 receiverFreePORT systemsEM 1 receiverSK 2bodypack transmitterSKM 3radio microphoneMains unit (NTxy)ME 2clip-on microphone¼” (6.

5Connecting the receiver왘 Insert the DC connector on the mains cable into the DC socket  andconnect it to the mains. The green LED for operation indi

6SK 2 bodypack transmitterInserting/replacing the batteryWe recommend powering the bodypack transmitter by a 9 V PP3alkaline battery (IEC 6 LR 61). If

7Connecting the microphone/instrument cableThe audio input is designed for the connection of both the ME 2 clip-onmicrophone and instruments (e.g. gui

8SKM 3 radio microphoneNote:The microphone head of the radio microphone cannot be changed. Inserting/replacing the batteryWe recommend powering the ra