Sennheiser NET 1 Especificações descarregar pdf (Página 5)

The NET 1 network system

The NET 1 allows you to control and monitor wireless Sennheiser multi-

channel systems.

Its main feature is frequency management, significantly simplifying the set

up of complex wireless systems. The NET 1 is a suitable tool for configuring

your system: It scans the channel banks, automatically assigns the

frequencies to the connected receivers and wirelessly synchronizes the

transmitters.

You can connect up to 10 receivers to one NET 1. For multi-channel systems,

it is possible to daisy-chain several NET 1 units. The connection is made via an

Ethernet interface. A connected PC enables additional real-time monitoring

as well as remote controlling of all relevant receiver parameters during live

operation, ensuring an excellent overview of the system at all times.

Using the NET 1, the following Sennheiser systems can be configured:

1. Evolution wireless systems of the ew 300 G2, ew 500 G2, ew 550 G2

series.

2. 3000/5000 series systems,

consisting of EM 3532, SK 5212, SKM 5200 and SKP 3000.

3. Combined systems, consisting of devices of the evolution wireless G2

series and the 3000/5000 series.

The NET 1 offers two operating modes:

y Evolution wireless G2 systems with up to 20 channels can be configured

directly via the NET 1 without the need for a PC. This is achieved by

connecting two NET 1 in “Master/Slave” operating mode using an Ethernet

cable.

y 3000/5000 series systems, combined systems and multi-channel systems

with more than 20 channels are controlled via a PC and the supplied

“Wireless Systems Manager” (WSM) software.

The NET 1 is compatible with previously released Sennheiser wireless systems

of the evolution wireless G2 series or the 3000/5000 series. However, you

must have the corresponding firmware or receive a firmware update.

Receivers or transmitters with the latest firmware installed are marked with

“NET” on the type plate and can be identified via the additional menu item

“Software-Revision” in the operating menu.

The firmware of the receivers and transmitters can also be updated via the

NET 1 when a PC is connected. The relevant firmware updates are contained

on the supplied CD or can be downloaded from the Internet at

www.sennheiser.de. The EM 3532 twin receiver does not require a firmware

update.

1 2 3 4 5 6 7 8 9 10 ... 29 30

Sem comentários

Sennheiser NET 1 Especificações Página 5