Sennheiser NET 1 Especificações descarregar pdf (Página 8)

LEDs on the front panel of the NET 1

  



LED Color of LED LED lights up permanently LED...

interface



backlit in blue

NET 1 is ready to transfer the

frequencies to the transmitter

–

CHANNEL 

(1 to 10 )

green

NET 1 has detected the connceted

receiver

...flashes slowly:

After the frequency preset scan, NET 1 indicates the

receivers belonging to the frequency range of the receiver

that has performed the scan. The frequencies of the

selected channel bank are transferred to these receivers.

IR frequency transfer is

successfully completed

...flashes rapidly:

NET 1 is transferring the frequencies to a transmitter.

...flashes once every second:

The firmware of the connected evolution wireless G2

receiver is not the latest.

SCAN

쐋

yellow

With the MODE button pressed,

NET 1 indicates that it is ready for

scanning

...flashes slowly:

A frequency preset scan is being performed.

READY



green

NET 1 is ready for operation ...flashes:

NET 1 has been switched on and is being initialized.

REMOTE



yellow NET 1 is PC controlled or

controlled via an additional NET 1

(“remote operation”)

–

ERROR



red

–

...flashes rapidly for approx. 3 seconds:

y An error has occured during IR data transfer;

data transfer must be repeated.

y The MODE button is being pressed but NET 1 cannot

switch to scan mode because:

– an EM 3532 twin receiver is connected.

– no receiver is connected.

– NET 1 is PC controlled or controlled via an additional

NET 1 (“remote operation”).

DATA LINK



yellow

A receiver is connected;

frequencies can be transferred to

the corresponding transmitter

...flashes slowly:

The frequencies are being transferred to a transmitter.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Comentários a estes Manuais

Sem comentários

Sennheiser NET 1 Especificações Página 8

Comentários a estes Manuais